Safe and healthy workplace
Mobile room systems
Do you have questions about our safe and healthy workplaces?
We are looking forward to supporting you in your planning.
Acoustic mineral crust ceiling
Optimum speech intelligibility thanks to maximum absorption capacity. Fleece laminated surface for a simple and elegant appearance.
Window insulationWindow insulation
Wall and floor insulation
26 mm insulating glazing in rubber profile for more energy saving and sound wave compensation.
Wall and floor insulation
Natural mineral wool, non-combustible and high thermal-shielding for effective room insulation.
Your most important advantages
Concentrated working in peace and quiet
The healthy workplace: optimum acoustic insulation
With their special wall and floor insulation, suspended ceilings with acoustic panels, carpeting and insulating glazing, WSM room systems create outstanding sound insulation – even in the loudest industrial environments.
They thus provide ideal space for concentrated work at full capacity and for communication without interference with employees. According to the Workplace Ordinance, the sound pressure level must be kept as low as possible, since high noise levels have a negative effect on health. Depending on the activity, a maximum level of 55 or 70 dB(A) is recommended. The integrated noise protection systems from WSM ensure that these limit values are safely and efficiently undershot.
Another important aspect of sound insulation is the reverberation time of the indoor space. Depending on the room volume, a reverberation time of 0.5 to 0.8 seconds should be maintained. The reverberation time significantly influences speech intelligibility and thus communication. Here, too, you receive the requisite acoustic solution with your WSM room system.
Fresh air creates clear heads
The healthy workplace: ideal room climate
Three factors are decisive for a pleasant working atmosphere: temperature, humidity and air quality. Here, a WSM room system creates the best possible environment, from pollutant- and emission-absorbing wall structures to efficient temperature controls and air cleaning equipment. Background: The air temperature in working rooms should be between 20°C and 22°C and should not exceed 26°C at peak temperatures.
Additional effective measures must be taken above 30°C. Above an air temperature of 35°C, the room is no longer suitable as a working room. Air humidity should be at least 40%. Air that is too moist is uncomfortable and air that is too dry can lead to static charging.
The supply of fresh air or air purification is particularly important for vitality. It should be generated by manual airing every hour or automatically without uncomfortable drafts. With a WSM room system, you ensure the best air quality, optimum room temperature and a fatigue-free working environment..
Raumabdeckende Luftreinigung
Intelligent filtration of 99.95% for particles as small as 0.1 micron. Detects and seals gases in real-time – control and monitoring via App.
Coated gypsum plasterboard
In a natural process, pollutants and emissions from the indoor air are absorbed by the wall and permanently bound.
Your most important advantages
Lighting control via App
The uncomplicated lighting control for complex lighting scenes. Control up to 127 lights, additionally via smartphone and internet if desired.
Sun protection and privacy
Opaque frosted glass that reduces solar radiation at the touch of a button. Protects against UV radiation, can be extended with solar UV sensors.
Your most important advantages
Light animates and motivates
The healthy workplace: intelligent light management
You ensure appropriate lighting at all times with a WSM room system. Numerous studies have demonstrated the importance of correct workplace lighting for mental and physical performance.
Artificial lighting is required by law to provide a minimum illuminance level which, for example, for office workplaces is set at 500 lx. Illuminance should be increased if precision is a work requirement. Furthermore, the illumination must be uniform. The colour temperature of the light also affects well-being. Daylight white light with a colour temperature of 6000 Kelvin is optimal as workplace lighting. This light composition promotes concentration and colour rendering is optimal.
WSM room systems can be optimally adapted to legal and custom requirements. Special LED lighting with light temperature control, brightness control, light sensor, motion sensor for energy efficiency and intelligent glass that protects against sunlight or creates privacy at the touch of a button or sensor ¬– all these options are yours to choose from.
Noticeably relieves body and mind
The healthy workplace: modern ergonomics
One of the most common causes of sickness-related absences is long-term damage caused by incorrect posture. That is why the ergonomic design of the workplace is elementary. For WSM room systems, the interior design is planned by an interior designer according to the latest ergonomic findings.
This already starts with the floor space for the workstation: it must not be less than 8 square metres and 6 square metres must be added for each additional workstation. The office chair must be individually adaptable, allow changing sitting positions and support the body in all sitting positions. A permanently tiltable backrest enables dynamic sitting. Height-adjustable desks make it possible to adapt the workplace to the height of the employee. This enables a healthy posture. In addition, certain guidelines for monitor workstations must be observed - such as viewing angles, separate keyboard, hand support, etc.
We plan these and many other requirements for you with our WSM room systems - ergonomically and at the same time with optimum use of space.
Ergonomic office chair
Patented 3D mesh backrest and 3D seat mechanism for dynamic sitting. Comfort knee roll for thigh relief. Infinitely-variable seat height adjustment.
Height-adjustable desk
Electric infinitely-variable height adjustment from 645 to 1305 mm for working in a standing position. 25 mm thick worktop with 100 kg load capacity. Extension easily possible.
Your most important advantages
Do you have questions about our safe and healthy workplaces?
We are looking forward to supporting you in your planning.
Current Compass Contributions
Mobile rooms in production and warehouse planning
Rooms are an integral part of every production and warehouse planning process. Taking continuous changes into account, particularly flexible rooms that adapt to different conditions are especially needed. This editorial deals with mobile room systems, the use of which should already be taken into account at the planning stage of production and storage sites.
Communication in flow
Smart bosses know that when their employees talk at work or during breaks, it usually involves exchanging experiences and solving problems.
Factory planning as a science
The VDI 5200 Factory Planning Guideline depicts all steps that can be considered meaningful and necessary according to the current state of science, from the definition of the goal to the successful completion of the project.
Outbuildings – business cards for every business
Even before a visitor enters the premises, he will be greeted by the friendly porter at the gate. It is usually the first employee and the first building the guest perceives.
Container or room module?
One of the inventions that changed our lives is the container. The prefabricated steel containers have greatly facilitated the transport of goods worldwide, significantly reducing the costs of international trade.
Rooms in factory planning
Rooms offer protection by isolating them from disturbing or harmful environmental influences. They also assume the task of concentrating various functions in a defined location and making them usable.
An original with very special capabilities
The popular “R” room system has been the “evergreen” at WSM for more than 40 years. The striking, rounded corners as a design feature were developed by Walter Solbach, the founder of WSM, and have since been copied many times.
WSM’s do-it-yourself house
We are expanding our range of spatial systems with the new “SmartUnit” spatial system. SmartUnit is being offered as a do-it-yourself house and is ideal for self-installation by your customers directly at the setup location.
WSM at the LogiMAT 2017 – simply well-constructed
The organisers of LogiMAT 2017 were able to celebrate the best result in their 15-year history – the 15th International Trade Fair for Distribution, Material and Information Flow ended on 16 March with record numbers of exhibitors, exhibition space and visitors.
- « Previous
- 1
- 2